|
|
|
|
CTC offers Splice Table Assemblies in various widths. The Splice Table is a fixture which helps an operator to clamp the leading end of a new roll to the trailing end of a recently expired roll while the Machine consuming the web is in a stopped condition. Once the webs are clamped, the operator manually trims both ends with a knife, using the guide bar of the Splice Table to insure an accurate cut.
The Splice Table is provided with pneumatic clamps and is furnished with separate pneumatic switches to actuate the front and rear clamps. The cantilevered Splice Table Assembly is furnished with a back plate to mount against a vertical surface.
For
more Information
Back
|
|
